{"title":"Adhesive Spray","description":"","products":[{"product_id":"tygris-heavy-duty-adhesive-400ml-spray","title":"Tygris Heavy Duty Adhesive  400ml Spray |R210","description":"\u003cp\u003eTYGRIS Heavy Duty Adhesive is an easy to use adhesive for bonding most surfaces including textile, foam, rubber, plastic, foil, cardboard and paper. Good for fixing down carpets, underlay and floor tiles. In a non-chlorinated form for maximum safety.\u003c\/p\u003e\n\u003cp\u003eBenefits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFast drying;\u003c\/li\u003e\n\u003cli\u003eBonds most surfaces;\u003c\/li\u003e\n\u003cli\u003eVariable discharge fan nozzle;\u003c\/li\u003e\n\u003cli\u003eHigh strength bond;\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConsult the safety data sheet prior to use - suitable Personal Protection Equipment should be worn. Use in a well ventilated area. Shake well before use. Surfaces should be clean, dry and free from dust and grease. Hold the aerosol at approximately 6” - 8” and 70°C to the surface. Apply a uniform coat of adhesive to one or both surfaces, ensuring 80-100% coverage. On porous surfaces, it may be necessary to apply a second coat. For one-way application, let adhesive dry for 30 seconds until tacky and then press into position.\u003c\/p\u003e\n\u003cp\u003eFor two-way application, spray both surfaces and allow to dry for 2 - 5 minutes before bonding. For temporary bonding, spray one surface and allow to dry for 2 - 5 minutes before bonding. To prevent the spray nozzle from blocking, at the end of each period of use, turn the can upside down and press nozzle until spray is clear of adhesive. Excess adhesive can be removed with a suitable solvent cleaner such as white spirit. TYGRIS Heavy Duty dries in two to five minutes under normal conditions. Dispose of used aerosols in line with local and national regulations.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/tygrisindustrial.com\/content\/COSHH\/Current\/R210_5060253476682.pdf\" target=\"_blank\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/tygrisindustrial.com\/content\/TECHDATA\/Current\/R210.pdf\" target=\"_blank\"\u003eTechnical Data\u003c\/a\u003e\u003c\/p\u003e","brand":"Tygris","offers":[{"title":"Default Title","offer_id":44494236156215,"sku":"TYGRIS R210","price":6.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5713\/9511\/products\/R210.png?v=1739540779"},{"product_id":"loctite-7649-activator-spray-150ml-loc-7649-150","title":"Loctite 7649 Activator Spray 150ml | LOC.7649-150","description":"\u003cp\u003e\u003cstrong\u003eLOCTITE® SF 7649\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eis designed to promote the curing speed of LOCTITE® anaerobic adhesives and sealants without any significant loss of joint strength. It is especially recommended for applications with passive metals or inert surfaces and with large bond gaps.\u003c\/p\u003e\n\u003cp\u003eIt offers good performance at low cure temperatures, and is recommended when the application temperature is below 15°C.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases cure speed on passive and inactive surfaces\u003c\/li\u003e\n\u003cli\u003eFor low-temperature curing (\u0026lt; 5°C)\u003c\/li\u003e\n\u003cli\u003eFor large bond gaps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Loctite","offers":[{"title":"Default Title","offer_id":58224317890941,"sku":"LOC.7649-150","price":19.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/5713\/9511\/files\/7649-150ML.png?v=1780047491"}],"url":"https:\/\/www.sbtltd.co.uk\/collections\/adhesive-spray.oembed","provider":"SBT Ltd. ","version":"1.0","type":"link"}